How to Configure Whatsminer for Bitcoin Mining

How to Configure Whatsminer for Bitcoin Mining

Follow these clear steps to properly configure your Whatsminer M60S and start mining Bitcoin efficiently.

Step 1: Power On the Whatsminer

After powering on the miner, you’ll hear it start up and notice the Ethernet light flickering. This means the Whatsminer is ready for configuration.

Step 2: Find the IP Address

You’ll need the miner’s IP address to access its interface. Use either of the following:

• Advanced IP Scanner, Download and scan to find the miner’s IP.

• Router Interface, Log in to your router and check connected devices.

Step 3: Access the Miner Interface

• Open a browser and enter the IP address.

• Log in using the default credentials:
  Username: admin
  Password: admin

Tip: Change your password in System > Administration for added security.

Step 4: Configure the Mining Pool

Before mining, connect your Whatsminer to a pool:

• Get a Bitcoin Wallet: Prefer hardware wallets like:

  • Tangem

  • Ellipal Titan 2.0

  • Trezor
    Or install Bitcoin Core on a dedicated laptop.

• Choose a Pool: Use platforms like Mining Pool Stats to compare pools. Avoid pools controlling over 50% of network hash rate.

• Example Pool Setup (ViaBTC):

  1. Register at ViaBTC and get pool info.

  2. In the Whatsminer settings:

     • Paste the pool address in Pool1.

     • Set Worker Name as youraccount.workername (e.g., mym60s.01)

     • Add a backup pool as Pool2.

  3. Click Save and Apply, then Reboot the miner.

Step 5: Start Mining

After setup, the Whatsminer M60S will begin mining. Monitor real-time stats and performance via its dashboard.

Step 6: Monitor Profitability

Whatsminer M60S profitability depends on:

• Hash Rate

• Bitcoin Price

• Electricity Costs

• Market Trends

To improve profits, choose efficient mining settings and follow Bitcoin price trends regularly.